Reassembly has begun

[Yogi]

I got the Progressives in the forks over the weekend, LaborMan if you follow the Service manual, It's pretty easy. The write up that is in the VRCC Shop Talk didn't help a bit until I had pictures. In Short, if you don't have it, buy the manual. :D Wheels painted (still need a little more polish) Stainless Cables last night. Should be able to finish the front end tonight. Still waitin' on some painted parts :roll:

Here are some links, Doesn't look like much yet.....

http://www.personal.psu.edu/staff/c/a/c ... /wheel.jpg (http://www.personal.psu.edu/staff/c/a/cah9/images/wheel.jpg)
http://www.personal.psu.edu/staff/c/a/c ... nFront.jpg (http://www.personal.psu.edu/staff/c/a/cah9/images/TeardownFront.jpg)
http://www.personal.psu.edu/staff/c/a/c ... wnRear.jpg (http://www.personal.psu.edu/staff/c/a/cah9/images/TeardownRear.jpg)
http://www.personal.psu.edu/staff/c/a/c ... cables.jpg (http://www.personal.psu.edu/staff/c/a/cah9/images/cables.jpg)

[Caretaker]

I've been painting my "slot" area for a while. I use flat black. The paint really sets off all that hard work you do to get them to shine! Not the best of pics, but here goes:

http://im1.shutterfly.com/procserv/47b3 ... 0000001610 (http://im1.shutterfly.com/procserv/47b3d839b3127cce89fdff6832a40000001610)

Yes, I'm tired of the below average (much below I might add) temps here also Yogi! Last year it was the second wettest year on record, what's NEXT!